KTM 1290 SUPER ADVENTURE R 2017, Owner'S Manual

Page: 36 / 274

6 CONTROLS
34
6.13 Race
‑
on button
K00805-10
The Race
‑
on button 1 is fitted on the right side of the combination switch.
Info
The Race
‑
on button performs the ignition lock function on this vehicle.
The steering can only be locked if the handlebar is turned fully to the left.
Possible states
• Race
‑
on button in the basic position.
• Race
‑
on button pressed briefly
–
Pressing briefly switches the ignition on and
unlocks the handlebar lock or switches the ignition off.
• Race
‑
on button pressed and held
–
Pressing and holding switches the ignition off
and locks the handlebar.
6.14 Steering lock (antenna)
K00856-10
On this vehicle, the ignition/steering lock is replaced by a remote key with transponder
(Race-on key (
p. 35)).
In order to activate the steering lock, the handlebar must be turned fully to the left.
The steering is locked and unlocked electromechanically via the Race-on button
( p. 34).
If the battery voltage of the Race-on key is too low, hold the Race-on key or the black igni-
tion key in area
A
on the motorcycle and repeat starting.
Info
Store the key safely again as soon as the engine has been started.
Possible states
• Ignition off, steering locked
–
In this operating mode, the ignition circuit is interrupted
and the steering locked.