ENGLISH
38
TECHNICAL SPECIFICATIONS – ENGINE 125/250 SX 2007
»
ENGINE
125 SX
250 SX
Design
Liquid-cooled, single-cylinder, two-stroke engine with intake and exhaust control
Piston displacement
124,8 cm
3
249 cm
3
Bore / stroke
54 / 54,5 mm
66,4 / 72 mm
Fuel
unleaded fuel with at least RON 95 (USA = Premium PON 91), mixed with high grade two stroke oil
Oil / gasoline ratio
1:40
1:60
when using high grade, two- stroke oil (Motorex Cross Power 2T).
Crankshaft bearing
1 deep-groove ball bearing / 1 cylinder roller bearing
Connecting rod bearing
needle bearing
Piston pin bearing
needle bearing
Piston
cast piston
Piston ring
two plain compression rings
Dimension „X“
0,0 mm
0,0 + 0,1 mm
Ignition timing
1.4 mm (0.055 in) (16.5°) BTDC
1.6 mm (0.063 in) (17°) BTDC
Spark plug
NGK BR9 EVX
NGK BR8 ECM
Electrode gap
0,60 mm
Dimension „Z“
43,5 mm (1.68 in)
47 mm (1.85 in)
Exhaust control start open -
5500/min
Exhaust control fully open -
7000/7500/7900/min (red/yellow/green spring)
Primary drive
straight cut spur gears
Primary ratio
23 : 73
26 : 72
Available chain sprockets 13t /14t for chain 5/8 x 1/4”
Clutch
multiple disc clutch in oil bath, hydraulically operated
(Motorex hydraulic fluid 75)
Motorex brake fluid DOT 5.1
Transmission
6 speed, claw actuated
5 speed, claw actuated
Gear ratio
1st gear
13 : 32 „1S32“
14 : 28
2nd gear
„2S15“
15 : 30 „2S30“
15 : 24
3rd gear
„3S17H“ 17 : 28 „3S28H“
18 : 24
4th gear
„4S20H“ 20 : 28 „4S28“
21 : 24
5th gear
„5S19H“ 19 : 23 „5S23“H
22 : 21
6th gear
„6S22H“ 22 : 24 „6S24“H
Gear lubrication
0,7 liter Motorex Top Speed 4T 15W50
Available chain sprockets 13Z / 14Z für Kette 5/8 x 1/4"
Coolant
1.2 litres, 40% anti freeze, 60% distilled water, at least -25 °C (-13 °F)
Ignition system
KOKUSAN 2K-1
Stator 2K-1/Rotor 2K-2
Carburetor
flat-slide carburetor, carburetor setting see table
Air-filter
wet foam type air filter insert
(upper edge piston-
upper edge cylinder)
(height of the
control flap)
