KTM 125 SX EU 2013, Setup Instructions

Page: 7 / 20

2 SETUP
5
B00900-01
–
Position the controls on the left half of the handlebar.
Info
The routing of the cables is shown in the figure.
–
Correctly mount the fuel tank breather.
–
Install the front fender. ( p. 8)
–
Install the start number plate. ( p. 8)
B00910-01
–
Mount the handlebar cushion.
800042-10
–
Mount the footrests with the springs and pins. Secure the pins using the washers
and cotter pins.
Pliers for footrest spring (58429083000)
800035-10
(250/300 XC)
Warning
Risk of injury Battery acid and battery gases cause serious chemical
burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep the battery away from sparks or open flames. Charge only in
well-ventilated areas.
–
In the event of skin contact, rinse with large amounts of water. If
battery acid gets in the eyes, rinse with water for at least 15 minutes
and contact a physician.
–
Fill the battery.
Info
Read the notes in the battery package.
–
Recharge the battery. ( p. 9)
–
Install the battery. ( p. 10)