KTM 125 SX 2018, Setup Instructions

Page: 7 / 21

2 SETUP
5
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamp.
–
Mount screws 3 but do not tighten yet.
–
First bolt the handlebar clamp with screws
3
onto the longer,
higher side of the handlebar supports so that both parts touch.
–
Tighten screws 3 evenly.
Guideline
Screw, handlebar
clamp M8 20 Nm (14.8 lbf ft)
K00938-10
–
Position the controls on the right half of the handlebar.
K00616-10
–
Position the controls on the left half of the handlebar.
–
Mount cable tie(s).
–
Mount the fuel tank breather.
–
Install the front wheel. ( p. 9)
–
Install front fender. ( p. 10)
–
Install the start number plate. ( p. 10)
K00617-10
–
Mount the handlebar cushion.