KTM 1190 RC8 R Track, Owner'S Manual

Page: 56 / 127

SERVICE WORK ON THE CHASSIS
54
10.1
Raising the rear of the motorcycle with lifting gear
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
601441-01
–
Insert the adapter into the lifting gear at the rear.
Adapter (61029055120)
Rear wheel stand (61029055400)
–
Stand the motorcycle upright, align the lifting gear to the link fork and the
adapters, and raise the motorcycle.
10.2
Removing the rear of motorcycle from the lifting gear
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Secure the motorcycle against falling over.
–
Remove the lift stand from the rear and lean the vehicle on the side stand.
10.3
Raising the front of the motorcycle with lifting gear
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Raise the rear of the motorcycle with lifting gear. ( p. 54)
601442-01
–
Move the handlebar to the straight-ahead position. Align the lifting gear at the front
with the adapters to the fork legs.
Front wheel stand (61029055300)
Info
Always raise the rear of the motorcycle first.
–
Raise the motorcycle at the front.
10.4
Taking the motorcycle off of the front wheel stand
Note
Danger of damage
The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
–
Secure the motorcycle against falling over.
–
Remove the lifting gear from the front.