6
Step 6: Secure the Fiber Adapter with the screw
you saved in step 4.
Step 7: Replace the PC cover.
Step 8: Proceed to “Connecting to Your Network”
section.
NOTE: Always ensure the power is cut off before
any installation to avoid electric shock and
possible damage to the equipments.
Connecting the Fiber ( SC ) Cable
A Multi-mode Fiber cable (50/125µm or
62.5/125µm, wavelength 850nm) with SC connector
is required for the Gigabit fiber Ethernet Card.
For cabling requirements and maximum segment
distance when connecting the Fiber Adapter to your
network, please refer to the Technical Specifications
on page 11.
