KTI CAS-700, User Manual

Page: 12 / 100

12
Rear Panel
1. Network Cable Connector
The Internet Camera’s rear panel features an RJ-45 connector for
connections to 10Base-T Ethernet cabling or 100Base-TX Fast
Ethernet cabling (which should be Category 5 twisted-pair cable).
The port supports the N-Way protocol and “Auto-MDIX”
function, allowing the Internet Camera to automatically detect or
negotiate the transmission speed of the network.
2. Reset Button
Reset will be initiated when the reset button is pressed once, and
Power LED begins to flash.
Factory Reset will be initiated when the reset button is pressed
continuously for three seconds or when Power LED begins to
light up. Release the reset button and the Power LED will begin
1. Network Cable Connector 4. DC Power Connector
2. Reset Button 3. I/O Connector