-6-
3. Making Network Connections
Two Switched Ports
Two switched ports are located on the front panel.
Configuration Switches
On rear panel, Port 1 and Port 2 have individual configuration switches
as shown below:
Port 1, Port 2 SW1
Off
Auto-negotiation is enabled.
On
Auto-negotiation is disabled.
Port 1, Port 2 SW2
Off
100Mbps is used. (When SW1 = On)
On
10Mbps is used. (When SW1 = On)
Port 1, Port 2 SW3
Off
Full-duplex is used. (When SW1 = On)
On
Half-duplex is used. (When SW1 = On)
Port 2 only
SW4
Off
Fiber connector is disabled.
On
Fiber connector is enabled.
Factory Defaults
SW1
Off
Auto-negotiation is enabled.
SW2
Off
100Mbps
SW3
Off
Full-duplex
SW4
On
Fiber connector is enabled.
