KTI Networks KGS-510F-B User Manual Download

Page: 30 / 66

-30-

4.5.1 SFP DDM Status

DDM (Digital Diagnostic Monitoring) information and status are provided in some SFP transceivers.
Part of the information are retrieved and listed as follows:

Information

Function

Port

Port number which has SFP slot (Port 4, Port 5, Port 6 come with SFP.)

Identifier

The identifier information of the transceiver

Connector

The connector type used on the transceiver

SONET Compliance

SONET compliance information of the transceiver

GbE Compliance

Gigabit Ethernet compliance information of the transceiver

Vendor Name

The vendor name of the transceiver

Vendor OUI

The vendor OUI of the transceiver

Temperature

The current temperature sensed inside the transceiver

Voltage

The working voltage sensed inside the transceiver

TX Power

The transmission optical power sensed

[Refresh]

Click to refresh current configuration

[Back]

Click to back to previous page

Note:

1. TX power data is displayed with unit of mW. It can be converted to dBm as remark.

2. N/A: the information is not available

Summary of Contents for KGS-510F-B



































































Search results

Summary of Contents for KGS-510F-B

Reviews:

Related manuals for KGS-510F-B

Brands by name

Popular brands

KTI Networks KGS-510F-B, User Manual

Search results

Summary of Contents for KGS-510F-B

Reviews:

Related manuals for KGS-510F-B

Brands by name

Popular brands