manualshive.com logo in svg

KTI Networks KFS-2621, User Manual

Share
Download
KTI Networks KFS-2621 User Manual Download Page 33

-33- 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

Configuration Description 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

Port No. 

The selected destination ports are forwarded all packets received on the source ports. 

Tx Rate 

Rate value: 0 ~ 255 

Rx Rate   

Rate value: 0 ~ 255 

Speed Base 

Low

 – Low rate base 

 

Port 1 ~ Port 26:  Port Rate (Bandwidth) = Rate value * 32Kbps 

High

 – High rate base 

 

Port 1 ~ Port 24:  Port Rate (Bandwidth) = Rate value * 256Kbps 

 

Port 25 ~ Port 26:  Port Rate (Bandwidth) = Rate value * 2048Kbps 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

[Apply] 

Click to apply the configuration change. 

[Refresh] 

Click to refresh the port rate display. 

[LoadDefault] 

Click to use the default configuration for all ports. 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

Status Description 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

Link Speed 

The port link speed: 10Mbps, 100Mbps, 1000Mbps 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

Note:

1. Rate value = 0 means full speed for Tx & Rx. 

2. Port 1 ~ Port 24 Link speed 10M with high rate base: Valid rate value 1~39 

3. Port 25 ~ Port 26 Link speed 10M with high rate base: Valid rate value 1~4 

4. Port 25 ~ Port 26 Link speed 100M with high rate base: Valid rate value 1~48 

Summary of Contents for KFS-2621







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands