8
3.2 Installing Wake on LAN Cable
If your system motherboard does not comply with PCI 2.2, follow
the steps to install the Wake on LAN cable:
1. Make sure your system motherboard is RWU capable.
2. Make sure WOL function is enabled in the system BIOS.
3. Locate the 3-Pin WOL connector on the system motherboard.
4. Plug one end of the WOL cable to the 3-Pin WOL connector of
the adapter.
5. Plug the other end of the WOL cable to the 3-Pin WOL
connector on the system motherboard.
Figure 3-2 Installing WOL Cable
