IP Address, Your IP Address, Your Subnet Mask required by your ISP in
the appropriate fields. If your ISP has provided you with a Connection ID,
enter it in the Connection ID field, otherwise, leave it zero.
The MTU feature specifies the largest packet size permitted for network
transmission. Enter the value desired, for most DSL users, it is
recommended to use 1460. By default, MTU is set at 1460
The Maximum Idle Time feature can control the connection time while
user’s need to save the cost of connection fee from ISP provider (default
time=0, always connect). Click on the Connect-on-demand button to dial
up to the ISP when only on demand, while there is a need of connecting to
the ISP automatically.
1-3 DNS
The Domain Name System (DNS) is the way that Internet domain names
are located and translated
into Internet Protocol (IP)
addresses.
If your ISP provided at least one DNS Server IP Address, type that
IP
Address
in the Primary DNS address fields. You can type up to another
DNS Server IP Addresses. The Router will utilize these for quicker access
to functioning DNS Servers.
1-4 Status
When finish configuring the Quick Setup, the Status screen will list up the
connection status for the Broadband Routers' WAN/LAN interfaces,
firmware and hardware version numbers, and the number of connected
clients to the network.
