-27-
Configuration
Description
MAC Address
The MAC address factory configured for the switch
It can not be changed in any cases.
S/W Version
The firmware version currently running
H/W Version
The hardware version currently operating
Active IP Address
Currently used IP address for the switch management
Active Subnet Mask
Currently used subnet mask for IP address for the switch management
Active Gateway
Currently used gateway IP address for the switch management
DHCP Server
Current IP address of the DHCP server
Lease Time Left
The time left for the lease IP address currently used
DHCP Enabled
Use DHCP to get dynamic IP address configuration for the switch
Fallback IP Address
IP address used when DHCP mode is not enabled
Fallback Subnet Mask
Subnet mask for IP address used when DHCP mode is not enabled
Fallback Gateway
Default gateway IP address used when DHCP mode is not enabled
Management VLAN
Set management VLAN information
- VID
VLAN ID configured for web management to the switch
- CFI
CFI value for web reply packets from the switch
- User priority
Priority value for web reply packets from the switch
Name *
Set the system name for this switch unit
Password
Set new password
Inactivity Timeout (secs) Set timerout for auto-logout timer
SNMP enabled
Enable SNMP agent
SNMP Trap destination
The IP address of the SNMP trap manager
SNMP Read community The community allowed for the SNMP [
get
] message
SNMP Write community The community allowed for the SNMP [
set
] message
SNMP Trap community
The community used for the SNMP trap messages sent by the switch
[Apply]
Click to apply the configuration change
[Refresh]
Click to refresh current configuration
Note:
1. It is suggested to give each switch unit a system name as an alternative unique identifica-
tion beside IP address.
2. Setting change of DHCP mode takes effective in next bootup.
Summary of Contents for A3349
Page 26: ... 26 4 4 System ...
