KTC W9009S5, User Manual, Page: 6 / 17

5
2.2 Wall Mounting with VESA Standard ( Fig.3)
1. Loose the two bolts with a screwdriver. Then the base and the knighthead
can be taken off. In order to prevent the two bolts from loose, it is better to
assemble the bolts into the axis of rotation on the rear cover of the monitor.
2. Clean up the signal cable, power cord, audio cable.
3. Fix the wall-mounting parts (optional parts according with VESA standard)
on the rear cover to mount the monitor on the wall.
2.3 Signal Cable Connection
2.4 Audio cable connection
2.5 Power Cord Connection
2.6 Power on
Insert the signal cable into VGA and DVI port of a computer. Then, lockup the
cover with screws to assure full connection to the earth. Insert another end of
signal cable into the corresponding port (VGA or DVI port) and lock up with screws.
Plug one side of the audio cable into the PC audio port, then plug the other side into the audio port of the
monitor.
Plug one end of the power cord into the input port of the monitor' power supply and then insert the other end
into the socket of the electrical source.
Switch on the power to both the monitor and your computer. After the monitor is power on, the LED lights up
green or blue. If the LED becomes red and flashing, please check the video signal cable connection. If the
LED is off, please press power switch slightly.