1 / 4
Application
Thank you for purchasing
DRIVE CHAIN TOOL SET (MCCU14).
In order to use this product safely and correctly, please be sure to read this Instruction Manual
before use. Please store it with the product.
Do not use the product except original intended purpose.
Do not use the product when the product or object to be worked on is defective in any way
such as it has crack or distortion.
Do not use the product for power tool such as impact wrench.
Each bolt is applied molybdenum grease. As for use this product longer, remove dirt and
dust etc. completely and apply molybdenum grease to each bolt again.
For chain sizes: 420・428・520・50(530)・532・630・632
This tool can be used for most domestic motorcycles.
Based on strength analysis, the design is in an optimum shape for durability and lightness
that even professional will approve.
Highly durable cutter pin & caulk pin is made from heat-treated special steel (SK type).
These parts have been designed to facilitate workflow.
・
Bolt removal is not required as cutter pins can be replaced from the front of the inner bolt.
・
The cutter pin can be used frequently in 40-50 series.
・
Press fitting is designed for all sizes (press fitting caulk receiving plate), and as it can also
be used in caulking, this allows for a much smoother operation.
The inner bolt does not need to be set after the joint pin has been removed as the plate
press fitting uses the same outer bolt.
The grip and handle are designed so that strength may be applied easily.
A drive tool such as a separate 3/8”sq. ratchet tool is required when using this tool.
For motorcycle drive chain replacements, removing chain pin,
press fitting joint plates (including clip type) and caulking
joint pins.
Characteristics
DRIVE CHAIN TOOL SET
INSTRUCTION MANUAL