1. Product Description
410-PROTIG20 Stick/TIG welder applies inert gases (Argon) as protective medium of arc. In TIG
process, high melting point tungsten or tungsten oxide is a electrode, work piece is another electrode,
the inert gases in the welding area are ionized by HF or high pressure pulse, and ionized gases will
generate arc
、
melt metal between the tungsten electrode and the work piece. The series welder applied
advanced IGBT(insulated gate bipolar transistor) and rapid recovery diode as main control and transfer
parts, assisted with specially designed control circuit, as result of smooth welding current adjustment
and good welding procedure. The series welder built-in the function of compensation for power
fluctuation, so it features soft arc
、
little splash
、
manageable welding line. Users can get the high
quality welding line in welding mild steel
、
stainless steel
、
hard steel and alloy steel.
410-PROTIG20 Stick/TIG welder feature is presented as below:
Small
、
light and suitable for fitment
、
repairing and operation on field.
Excellent high voltage high frequency arc pilot. Low voltage controlling and high voltage
outputting, the arc-pilot circuit attributes to convenient non-contact arc pilot and 99.9% arc pilot
successful ratio.
Perfect Protection function. Featured with overheating
、
over/lack voltage
、
over current
protection, the power supply net compensation which boosts up along with the current decreasing
is not less than ±15%. Anti-jamming function of controlling system is enlarged, and it can keep
stable current output with 1ms speed in answer to the variety of the power net
、
work
piece
、
electrode holder and manual operation.
Convenient connection function. Exterior connection result in quick
、
safe
、
simple
、
reliable
operation.
410-PROTIG20 feature with excellent arc pilot and metal transfer.
No notification will be given if the contents or function of the welder in this book change; Our
company reserves the right to update the manual without notification.
2. Safety Operation
Operator’s Self-protection
* Please always follow the rules that conform to safety and hygiene. Wear protective garments to
avoid injuries to eyes and skins.
* Use the welding helmet to cover your head while working with the welding machine. Only by
viewing through the filter lens on the welding helmet can you watch your operation.
* Under no circumstance can you allow any part of your body to touch the welder’s output bipolarity.
* Do not operate under water or more humid place.
Attention
* 410-PROTIG20 Welder are electric product whose spare parts is very tender, do not change or
adjust with a rush otherwise the switch will be damaged.
* Check the connection to see if the welder input and output cables are well connected, whether
the earth (ground) connection is reliable, etc.