KNC-p3BR_XIR IP Super Beam IR Bullet Camera
·
Quick Operation Guide
11
11
●
Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing haze, distortion or improper scene exposure.
●
Any foam ring around the lens must be seated flush against the
inner surface of the cover/bubble to isolate the lens from the IR
LEDS. Fasten the lens/dome cover to camera body so that the
foam ring and the dome cover are attached seamlessly.
Steps:
1.
Drill the cable hole and the screw holes in the wall or ceiling
according to the supplied drill template. Insure that the
mounting surface can support at least three times the weight of
the camera, and make allowances for any wind or snow loading if
indicated.
Figure 2-1
The Drill Template
2.
Insert the supplied plastic expansion anchors into the screw holes
if needed.
2:Screw Hole for
Mounting Base
1:Screw Hole for
Bracket
2
1
Ceiling Mounting
2
2
2
1
1
1
