KT&C KPC-VNW101NHV15, Operation Manual

Page: 30 / 31

9.OSD Menu
- MOTION DET : Motion detection function.
①
MOTION MODE : Enable user to set up ON/OFF
②
ZONE : Enable user to set up detection zone.
-> TOP, BOTTOM, CENTER, LEFT, RIGHT,WHOLE
③
LEVEL : Enable user to set up a sensitivity (0~5).
④
INITIAL : Enable user to initialize setting of MOTION DET.
- DISPLAY : Enable user to set up a screen marking of CAM ID,
CAM TITLE, MOTION
①
CAM ID : Enable user to set up output on Camera ID screen.
②
CAM TITLE : Enable user to set up output in fixed CAM TITLE.
③
MOTION : Enable user to set up out put of MOTION on the screen as
MOTION DET ON setting.
④
INITIAL : Enable user to initialize of DISPLAY menu.
8. FACTORY DEFAULT
: Enable user to reset all of the status as the factory default
Setting up using LEFT, RIGHT KEY.
9. EXIT
: Enable user to EXIT the OSD menu Setting up using LEFT, RIGHT KEY.
30