2
internal battery. We recommend you switch off the speakerphone
power during the charging process.
2. To prolong the life of a rechargeable battery, it is recommended to
completely discharge it before fully charging it again.
3. Rechargeable batteries need to be cycled for maximum performance
and longer battery life. If you don’t use the player that often, be sure to
recharge the battery at least once a month in order to keep the
internal battery working properly.
Charging in Unit Power OFF mode
•
The Indicator LED is RED while charging.
•
The Indicator LED will turn-off automatically when the battery is fully
charged.
Battery Note and Care
Do not burn or bury batteries.
Do not puncture or crush.
Do not disassemble.
Li-ion batteries must be recycled. Do not dispose of in the trash.
Use only chargers rated for Li-ion cells. Be sure the charger’s voltage and
current settings are correct for the battery pack being charged.
Charge batteries on a fireproof surface and away from flammable items or
liquids.
Batteries should NEVER be left unattended while charging. Only adults should
charge the batteries.
Follow the manufacturer’s instructions for charging the product and do not
charge longer than recommended. Unplug the charger when the battery is
charged or not in use.
NOTE:
The speakerphone is not magnetically shielded and may cause color
distortion on the screen of some TVs or video monitors. To avoid this, you may need
to move the unit further away from the TV or monitor if an unnatural color shifts or
image distortion occurs.
TURNING THE KT-9088 POWER ON/OFF
1. In standby mode, push the
ON/OFF
button to the left side
until a beep sound is
heard to turn the unit ON, the Indicator LED will flash blue 3 times.
2. To turn the unit OFF, just push the
ON/OFF
button to the right side.Don’t forget to
turn off the Bluetooth feature on your cell phone.
SPEAKERPHONEPHONE OPERATIONS
PAIRING (LINKING) A BLUETOOTH ENABLED MOBILE PHONE OR OTHER
BLUETOOTH ENABLED DEVICE TO THE KT-9088
1. If the KT-9088 has never been paired with a Bluetooth device before. You need to
follow the pairing instructions below to link the KT-9088 with your Bluetooth device.
•
In standby mode, push the
ON/OFF
button to the right side
until a beep sound
is heard, the Indicator LED will alternately flash blue and red. The
speakerphone is ready to pair (link) with your Bluetooth device.
•
Turn on the Bluetooth function of your cell phone and enable the search or
scan function to find the KT-9088.
•
Select "KT-9088" from the device list when it appears on your device screen. If
required, enter the pass code “0000” to pair (link) the KT-9088 with your
mobile phone or Bluetooth device.
2. After turning on the KT-9088, the unit will search for the last paired device. The
POWER/CHARGING/BLUETOOTH STATUS INDICATOR
will flash rapidly in blue.
