© 2005 K.T. Sports, Ltd.
FIG. 1B
FIG. 1
12
13
11
PEEL THE WAX PAPER OFF
THE PUCK RETURN TRAY AND
ATTACH PUCK RETURN TO
THE TABLE AND TRAY
PUCK RETURN
W/ TRIGGER
PUCK RETURN TRAY
(PRE-INSTALLED)
24
8
7
26
17
24
26
8
7
12
8
7
1
2
3
4
4
1
3
2
17
21
= 6 X 30 MM (16)
= 18 MM (16)
8
7
= 3.5 x 14 MM (8)
17
P. 4
7) Lift the table assembly from the floor with two strong adults, turn it over, and set table on its legs in the
location where you will play.
HOLD TABLE
CABINET
DO NOT
HOLD THE
LEGS
DO NOT LEAN THE
TABLE ON ITS LEGS!
CAUTION:
Two strong adults are recommended to turn
the table as shown.
1. Grab the table on the ground.
2. Turn the table over.
3. Place it on all four feet at the same time on the ground.
4) Attach the two Leg Panels (#3) to the legs (#1 and #2) using four Bolts (#7) and four Washers (#8) on
each side of the Leg Panel. Next, attach the two Cross Braces (#4) to the Legs (#1 and #2) using four
Bolts (#7) and four Washers (#8) per end of the Cross Brace. Tighten securely with the 5mm Allen Key
(#21) provided. See Fig. 1. Now go back and tighten the Legs securely.
5) Attach the four Bell Style Leg Levelers (#24) to each of the legs.
NOTE
: Leg Levelers are optional and
if the game is to be used on a smooth floor, we recommend not installing them.
6) Peel the wax paper off the pre-installed Puck Return Tray (#11) and attach the Puck Return with Trigger
(#12) to the Puck Return Trays and to the ends of the table using four Screws (#17) as shown in Fig. 1
and 1B. Pilot holes show the proper screw placement.