WARNING: These instructions must be carefully read by all individuals who wear or maintain this product, including those who
have any responsibility involving the selection, application, use or repair of this product,. This product will perform as designed only
if it is used and maintained according to the instruction. Otherwise, it could fail to perform as designed, and persons who rely on this
product could sustain serious personal injury.
Avoid the effects of suspension trauma with the use of trauma relief straps.
1. Extremely effective, specially designed to help relieve the negative effects of suspension trauma.
2. Compact and light in weight, hence does not hamper the activity of worker while at work.
3. Allows the suspended worker to stand up in his harness to relieve pressure.
4. Easy to attach to the harness with the help of the textile loop and velcro provided.
5. Easy deployment, operation is fool-proof.
It is recommended that the trauma relief straps should be inspected and examined by a competent person for any damage of failure, if
the need arises. The observation should be recorded in the equipment record table below. In case damage is observed, the trauma relief
straps should be replaced immediately.
Max user weight - 310 lbs.
INSTALLATION
Install each Trauma Relief Strap immediately above where the leg strap meets the side/shoulder strap (as shown).
Step 1. Pass Trauma Relief Strap web loop behind harness strap and pull back around.
Step 2. Pull Trauma Relief Strap pouch through web loop and choke down to harness strap. Pouch must be on outside of harness strap.
Step 3. Secure Trauma Relief Strap snap buckle around harness strap.
Step 4. Repeat steps 1-3 on opposite side.
Step 5. Trauma Relief Straps are now installed and ready to use. Please familiarize yourself with the steps of use on next page.
2
1
2
3
4
