KStrong FC409151 User Instruction Manual Download Page 2

Page: 2 / 12

This manufacturer's user instruction manual meets the requirements of ANSI Z359.12-2009. As per OSHA, this manual
should be used as a part of an employee training program.

WARNING

The products enumerated in this instruction manual are part of a personal protective, work support or rescue system. It
is important that the user reads and follows the manufacturer's instructions for each component of the system. This
manual contains information which is important to the user's safety and should be kept in a safe place for any future
reference as needed. The instructions provided in this manual are meant for the use of this equipment and should be
read thoroughly and understood by the user before the equipment is used. Manufacturer's instructions must be
properly followed for the correct use and maintenance of this equipment. Never attempt to alter or misuse the products
enumerated in this manual and always follow the manufacturer's instructions. Failure to do so may result in serious
injury or even death. Please contact KStrong for any questions regarding use of this equipment.

In order to ensure that the user is familiar with the instructions provided in this manual, it becomes the responsibility of
the user to undergo proper training on the proper inspection, use and maintenance of this equipment. It is also the
employer's responsibility to ensure that all the users are trained in proper use, inspection and maintenance of Fall
Protection Equipment.

TECHNICAL SPECIFICATION

TRAINING

Model

Material of Construction

Minimum Breaking
Strength

Conformity

Always send the equipment back to the manufacturer, or to persons or entities authorized in writing by the

manufacturer, for any repairs if required.

This equipment should never be used for towing and hoisting or for any other purpose than its intended use.

Authorized persons, or users, shall be trained on all warnings and instructions provided in this manual.

A competent person must ensure compatibility of the system to minimize any potential for accidental disengagement.

Fall protection equipment should only be used for the purpose for which it has been designed. Work positioning

lanyards are not to be used for material handling, and other such activities.

Never use any natural material like manila, cotton, etc. as part of a fall protection system.

"Authorized Person" is a person who is exposed to fall hazards during the course of their work. This individual
requires formal training in the use of personal fall protection equipment and systems. The term "Authorized
Person" may be used interchangeably with "User" and "End-User".

DO NOT ALTER the equipment in any way.

It is important to inspect the equipment according to the manufacturer's instructions before each use.

DO NOT REMOVE product labels which include important warnings and information for the authorized person.

IMPORTANT INFORMATION

Inspection of equipment should be conducted on a regular basis by a qualified person and the results recorded in

the inspection log.

FC409151

UFC401100

UFC408120

UFC401400

UFC401101

UFC401110