manualshive.com logo in svg

KSR IDS-101, User Manual

Get your hands on the user manual for KSR IDS-101 today and make the most out of your device. This comprehensive manual is available for free download from manualshive.com, providing you with all the information you need to maximize the capabilities of your KSR IDS-101.

Share
Download
background image

 

26 

▓ECU PIN ASSIGN   

  (KEIHIN) 

 

      1                    10                    18 

    19                                 

    36 

 

 

 

 

 

  1:

 

IGP [R/Y]    B+                     

  2:                                                             

  3:

 

CRK-P [G/W] Crankshaft pos.  

  4:                                                             

  5:

 

TH    [W/Br]    Throttle angle(A/D)     

  6:

 

PM [B/R] Manifold press. SNSR I/P(A/D) 

  7:

 

HEGO [Pink/B]    O2 sensor(A/D)   

8:

 

LG    [G]          shield GND                 

<Enter>return<LEFT>prev.page<RIGHT>next page 

   

Summary of Contents for IDS-101


































































































































Reviews:

No comments

Related manuals for IDS-101

ABB Navigator 550 Manual preview
Navigator 550
Brand: ABB Pages: 6
ABB E-Hub 2.0 Getting Started preview
E-Hub 2.0
Brand: ABB Pages: 18
R-Tech X5 Quick Manual preview
X5
Brand: R-Tech Pages: 3
Baker Hughes Druck DPI 880 Instruction Manual preview
Druck DPI 880
Brand: Baker Hughes Pages: 168
Panasonic WJHD100 - DIGITAL DISC RECORDE Specifications preview
WJHD100 - DIGITAL DISC RECORDE
Brand: Panasonic Pages: 7
Parker Research Corp B100 Operating Instructions preview
B100
Brand: Parker Research Corp Pages: 4
Eastwood B100 Instructions Manual preview
B100
Brand: Eastwood Pages: 20
Daihan Scientific WiseSpin CF-10 Operation Manual preview
WiseSpin CF-10
Brand: Daihan Scientific Pages: 43
Federal Signal Corporation VECTOR Installation And Maintenance Instructions preview
VECTOR
Brand: Federal Signal Corporation Pages: 2
Harman Kardon EQ8 Owner'S Manual preview
EQ8
Brand: Harman Kardon Pages: 7
Hammer Strength MTSP Unpacking And Assembly Instructions preview
MTSP
Brand: Hammer Strength Pages: 18
Palmako Harry Assembly, Installation And Maintenance Manual preview
Harry
Brand: Palmako Pages: 83
M-system Mini-MW Series Manual preview
Mini-MW Series
Brand: M-system Pages: 5
MA dot2 User Manual preview
dot2
Brand: MA Pages: 2
LAPPSET Promenade Installation Instructions Manual preview
Promenade
Brand: LAPPSET Pages: 16
YMC Pilot Manual preview
Pilot
Brand: YMC Pages: 49
Octane Fitness Q47 Product Safety Information preview
Q47
Brand: Octane Fitness Pages: 8
Octane Fitness LX8000 Preventative Maintenance And Diagnostics preview
LX8000
Brand: Octane Fitness Pages: 10

Brands by name

Popular brands

Load more brands