Output power : 5.55 Max W - h.
Working temperature : 0 C 45 C.
Net weight : 162 g.
Solar Po is splash proof, but shall not be emerged fully under water.
1 x charger Solar Po with solar panel.
1 x USB charging cable with micro USB plug.
1 x carabiner.
Certification IPX
It refers to the international standard IEC 60529 which provides degree of protection as a component, in this case a Smartphone, when protected from other
materials such as dust or water inside a case made this standard.
The scale of protection IPX starts at level 0 (IPX0) where the device has no protection against dust or water.
Until the maximum level of protection for this scale level 8 (IPX8) that can in a complete and continuous immersion withstanding without complete and
continuous filtration immersion.
How to recharge your digital device with Solar Po
Front.
1- Solar panel for charging the chargers built-in battery.
2- USB port for charging electronic devices.
3- LED indicator wish shows the solar charger,s battery charge status.
4- LED indicator wish shows the solar charger,s efficiency.
5- ON-OFF.
6- USB port for charging electronic devices.
Back.
7- USB cable for the charger,s built-in battery.
1- Make sure the internal battery of Solar Po is charged by pressing on the key briefly. A full charge of Solar Po enables to charge 2 x times a
mobile phone.
2- You can use either the charging cable supplied with Solar Po (micro USB charging cable) or directly the original USB charging cable supplied with
your device (iPhone,iPod, iPod, ..)
3- Plug in the USB cable to one of the USB output port (output 5V) of Solar Po
4- Simply press the ON - OFF key once to switch on your Solar Po Power: Charging will start automatically after a few seconds and you can see it from
the charging indicator on your device. It is normal that the LED lights of the Solar Po do no light on while charging your device for power management
optimization.
5- When your device is fully charged or disconnected, Solar Po will automatically switch off. Charging time for a standard mobile phone: 90 mn
How to use the LED Flashlight
Just press 5 seconds on the ON-OFF key to switch on the LED Flashlight
N.B: A charging cable with micro USB plug is included, and can be used with most all the mobile phones and GPS.
For some specific models like iPhone, iPod, iPod, Samsung Galaxy Tab or other devices charging thru USB source, the original charging cable delivered with your
device can be used directly for charging from Solar Po.
All the trade mark brands are the property of their respective intellectual property owners. The Products are not affiliated to the quoted brand names.
Precautions before use.
Make sure the voltage of your device ranges between 4.5V to 5.5V
Please read carefully these instructions as incorrect use of Li-Polymer batteries may lead to dangers such as overheating, fuming, catching fire.
Do not disassemble or open the charger
Do not throw or knock
Keep away from children
Make sure the solar panels are clean for optimum results
Solar Po is splash proof, but shall not be emerged fully under water.
Do not leave unit in the car under the sun as temperatures could potentially exceed safe operating conditions for the internal battery (max Temperature - 113ºF
or 45ºC).
How to recharge
