KSI Seed Filtration, Owner'S/Operator'S Manual

Page: 8 / 41

4
KSi SEED FILTRATION
USER'S MANUAL
15. NEVER attempt to assist machinery operation or to remove trash from the equipment while in
operation.
16. Use ample overhead lighting during periods of low light, such as after sunset, to light the work area.
17. ALWAYS lockout and tagout ALL power sources to the equipment before beginning adjustments
or repairs.
18. Keep the area around intake free of obstacles such as electrical cords, blocks, etc. that might trip
workers.
19. Components of this equipment have sharp edges which can scrape and/or cut an operator.
20. Moving pieces with this equipment can sever an operator’s limb or even kill.
Shields and Guards
1. Always keep all shields and guards in place during operation.
Beware of Electrical Hazards
Electricity can kill! Use extreme caution around electrical components.
Have your electric company check the transformer and lead wires to be sure that they are large
enough to handle the additional load of the motor.
Electrical wiring should be done by a qualified electrician and all components shall comply with applicable
provisions of National Fire Protection Association Standard NFPA No. 70, American National Standard
Inst. ANSI-C1 or with the requirements of the authority having local jurisdiction. KSi assumes no
responsibility for the electrical wiring used with this machine.
KSi will not be liable for failure of the equipment due to poor or improper electrical power installation.
Wires which are too small deliver insufficient voltage causing the motor to overload or burn out.
Improper or inadequate wiring can kill or cause fires.
All electrical devices used on this machine shall be arranged to operate in a “fail safe” manner, that is, if
power failure or failure of device occurs, a hazardous condition must not result. This means, the machine
must not restart by itself after a power failure etc. when power returns. A means to lock out power must be
provided at time of installation to prevent inadvertent starting of the equipment.