KSI Rebag Kit Instruction Manual Download Page 10

 

KSI 65 UNIT HOPPER REBAG KIT 

USER'S MANUAL 

General Safety Statements

 

1.  KSi’s principal concern is your safety and the safety of others associated with seed handling 

equipment.  We want to keep you as a customer.  This manual is to help you understand safe 
operating procedures and some problems which may be encountered by the operator and other 
personnel.  
 

2.  As the owner and/or operator, it is your responsibility to know what requirements, hazards, and     

precautions exist, and to inform all personnel associated with the equipment or that are in the area.     
Safety precautions may be required from the personnel.  Avoid any alteration to the equipment.  
Such alterations may produce a very dangerous situation, where serious injury or death may occur. 
 

3.  This equipment shall be installed in accordance with the current installation codes and applicable     

regulations which should be carefully followed in all cases.  Authorities having jurisdiction should be 
consulted before installations are made. 
 

4.  Untrained operators subject themselves and others to the possibility of serious injury or death.  

NEVER ALLOW untrained personnel to operate this equipment. 
 

5.  Keep children and other unqualified personnel out of the working area at all times. 

 

6.  NEVER start equipment until ALL persons are clear of the work area. 

 

7.  Be sure ALL operators are adequately rested and prepared to perform all functions of operating 

this equipment. 
 

8.  Keep hair, loose clothing, and shoestrings away from rotating and moving parts.  Never wear 

loose-fitting clothing when working around equipment. 
 

9.  NEVER allow any person intoxicated or under the influence of drugs or alcohol to operate the 

equipment. 
 

10. NEVER allow anyone inside a bin, truck, or wagon which is being loaded or unloaded.  Flowing 

grain can trap and suffocate in seconds. 
 

11. Make sure someone is nearby who is aware of the proper shutdown sequence in the event of an 

accident or emergency. 
 

12. NEVER work alone. 

 

13. ALWAYS think before acting.  NEVER act impulsively around the equipment. 

 

 

Summary of Contents for Rebag Kit






















Reviews: