code R30043.110en www.kseniasecurity.com
ed.12/2020
INSTALLATION
ergo-T and ergo-T plus, must be installed on plain surface, housing the metal support plate pre-drilled
directly on a DIN 503 recessed box or on a European standard boxes (60mm screw-distance).
Connect the network cable coming from the control panel to the Ethernet IP / PoE port of the keypad (also
connect the power supply if PoE is not supported).
After inserting the keypad into the appropriate support hooks (point 5), slid it downwards to lock the device.
Finally, stop the bottom of the device using the supplied screws.
Legend
1 - DIN 503 recessed box
2 - Metal support plate
3 - Plate fixing screws
4 - ergo T/ergo-T plus
5 - Keyboard bottom locking hooks
6 - Housing for locking screws
7 - Keypad fixing screws
To improve the stability of the
ergo-T plus keypad
, place the 4 adhesive rubber feet provided, as shown in
the following image:
