code R30021.110en www.kseniasecurity.com
ed.10/2020
INSTALLER MENU
Access the installer menu with a PIN code (
default: 123456
). You can navigate the various items by pressing the
keys once you have entered the installer menu:
•
ENTER: enter the sub-menu, confirm the values displayed or modified.
•
ESC: exit the sub-menu, return to the previous menu, leave the installer menu.
•
DOWN ARROW (SCROLL CLOCKWISE)/UP ARROW (SCROLL ANTICLOCKWISE): move from one item to
another within the same menu.
A list of some installer menu items:
•
Sys. management
: system management with the following items:
Reset alarm
: all the alarms will be stopped, the tamper and alarm memories will be deleted.
Stop calls
: all the communications, in progress and in queue, will be deleted (SMS, phone calls, email,
etc.).
Freeze system
: three possible choises
-
No freeze
: normal activity.
-
Freeze alarms
: no action against the alarms will be performed.
-
Freeze actions
: freeze all the actions of control panel.
•
User management
: assign a RF-ID key to the users configured.
•
Event logger
: list of events occurred with details.
•
Fault list
: list of faults in progress.
•
Zone status
: view of the status of the zones configured in the system.
•
Zone test
: list of zones that were never been in alarm since the TEST started, useful during the
installation process.
•
Installer data
: installer data management
Change PIN
: change installer PIN code.
Description
: installer name.
Number
: installer telephone number.
•
Update
: it launches the software upgrade using the file present in the SD card and previously downloaded from
www.kseniasecurity.com, reserved area.
•
Programm. Back-up
:
-
Create new
: backs-up any programming by saving the file on an SD card.
-
Restore
: any programming data saved previously will be read from the SD card and loaded into the control
panel.
•
Networking
: network configuration menu which allows the network parameters to be read/modified
-
IP Address
: the control panel IP Address
-
Subnet mask
: subnet-mask
-
Gateway
: IP address of gateway
-
DHCP server
: OFF / ON (default ON). This menu item is activated to allow the DHCP to be re-enabled if the
control panel has been set to a fixed IP address.
•
Language
: select the language of the keypad form the list.
•
Panel version
: this allows you to view the control panel firmware version (although not the web server).
