background image

3 Transport/Storage/Disposal

10 of 38

ECOLINE GT 40

7367.8/06-EN

3 Transport/Storage/Disposal

3.1 Checking the condition upon delivery

1. On transfer of goods, check each packaging unit for damage.

2. In the event of in-transit damage, assess the exact damage, document it and

notify KSB or the supplying dealer and the insurer about the damage in writing
immediately.

3.2 Transport

Transport the valve in the closed position.

 DANGER

The valve could slip out of the suspension arrangement

Danger to life from falling parts!

Only transport the valve in the specified position.

Never attach lifting accessories to the handwheel.

Observe the information on weights, centre of gravity and fastening points.

Observe the applicable local accident prevention regulations.

Use suitable, permitted lifting accessories, e.g. self-tightening lifting tongs.

For actuated valves observe the relevant actuator operating manual. Transport
aids on the actuator are not suitable for suspending the entire valve/actuator
assembly.

To transport the valve, suspend it from the lifting tackle as illustrated.

Summary of Contents for ECOLINE GT 40







































Reviews: