KSB Deep Lift System, Installation & Operating Manual

Page: 23 / 34

6 Servicing/Maintenance
23 of 34
Deep Lift System
2553.89/04-EN
6 Servicing/Maintenance
6.1 Safety regulations
The operator ensures that maintenance, inspection and installation are performed by
authorised, qualified specialist personnel who are thoroughly familiar with the
manual.
WARNING
Fluids and supplies posing a health hazard and/or hot fluids and supplies
Risk of injury!
▷ Observe all relevant laws.
▷ Decontaminate lifting accessories which have been used in fluids posing a
health hazard.
▷ When handling hazardous fluid take appropriate measures to protect persons
and the environment.
WARNING
Insufficient stability
Risk of crushing hands and feet!
▷ During assembly/dismantling, secure the lifting accessory against overturning or
tipping over.
A regular maintenance schedule will help avoid expensive repairs and contribute to
trouble-free, reliable operation of the pump, pump set and pump parts with a
minimum of servicing/maintenance expenditure and work.
NOTE
All maintenance work, service work and installation work can be carried out by KSB
Service or authorised workshops. For contact details please refer to the enclosed
"Addresses" booklet or visit "
www.ksb.com/contact " on the Internet.
Never use force when dismantling and reassembling the equipment.
CAUTION
Use of impermissible spare parts
Damage to the machinery!
▷ Never use spare parts which do not meet the technical requirements.
6.2 Maintenance/inspection
KSB recommends the following regular servicing schedule:
Table 8: Overview of maintenance work
Maintenance interval Maintenance work
Annually General visual inspection, measurement and verification of dimensions
against the reference dimension to be performed by competent persons in
accordance with the BGR 500 / GUV regulations (health and safety regulations
of the German trade association and statutory accident insurance
requirements).
Reference dimensions ▪ Deep Lift System DLS-4: ( ð Section 8.2.2, Page 28)
▪ Deep Lift System DLS-15: ( ð Section 8.2.3, Page 28)