manualshive.com logo in svg

KSB BOA-Control SBV, Operating Manual

Share
Download
KSB BOA-Control SBV Operating Manual Download Page 7

1 General

7 of 28

BOA-Control SBV

7130.8/01-EN

1.5 Key to safety symbols/markings

Table 3: 

Definition of safety symbols/markings 

Symbol

Description

!

DANGER

DANGER

 

This signal word indicates a high-risk hazard which, if not avoided,
will result in death or serious injury.

!

WARNING

WARNING

 

This signal word indicates a medium-risk hazard which, if not
avoided, could result in death or serious injury.

CAUTION

CAUTION

 

This signal word indicates a hazard which, if not avoided, could
result in damage to the machine and its functions.

General hazard

 

In conjunction with one of the signal words this symbol indicates a
hazard which will or could result in death or serious injury.

Electrical hazard

 

In conjunction with one of the signal words this symbol indicates a
hazard involving electrical voltage and identifies information about
protection against electrical voltage.

Machine damage

 

In conjunction with the signal word CAUTION this symbol indicates
a hazard for the machine and its functions.

Summary of Contents for BOA-Control SBV





























Reviews:

No comments

Brands by name

Popular brands

Load more brands