14
Movitec V 2,4,6,10,15 & 90
6
Transport
6.1
Transport
1.
Transport the pump in the position as indicated
on the pallet or packaging.
2.
Make sure the pump is stable.
3.
If present, observe the instructions on the
packaging.
WARNING
Lift the pump, if necessary using a hoist
and suitable slings. Attach the slings to
the transport lugs on the packaging,
where present.
WARNING
The pump must be lifted according to
the current hoist guidelines. Only
qualified personnel is allowed to lift the
pump.
WARNING
Do not lift the pump by using the
frequency converter (if placed),
electrical parts or the motor cover. Be
sure that the pump is always in balance.
WARNING
Pumps could tilt while lifting. Do not
remove the lifting devices from the
pump before the pump is placed and
mounted correctly.
Table 9: Transport positions
6.2
Storage
Fill the pump with glycol in order to protect it against
the risk of frost.
Table 10: Storage
6.2.1
Inspection during storage
1.
Turn the shaft every three months and just
before putting into operation.
ID3079
ID3080
ID3081
ID3082
2
0080
196/20
0801
97/2008
0192
/2
0081
95
Storage
t
ambient
[°C]
-10/40
Max. rel. humidity [%]
80% at 20°C not condensing
Goodnal STP ST041 Disinfection & Outfall (KSB ATF Feed Pump Skid PU-0700-110
Q-Pulse Id VM405
Active 29/10/2013
Page 16 of 41
