A
B
C
PressureWave™
tanks are ideally suited for a wide range
of applications, including booster systems, thermal expansion,
irrigation systems, and hydraulic hammer arresting.
The PressureWave™ Series is constructed of a virgin polypropylene
liner combined with an FDA approved high grade butyl diaphragm.
This is held against the wall of the tank with a steel clench ring.
The brass air valve, sealed by a threaded o-ring valve cap,
prevents air leaks. Water enters the tank through
a patented stainless steel water connection.
The diaphragm and liner are both reinforced
in specific wear areas for longer life. All
internal parts including the air valve are
rounded to prevent piercing of the
diaphragm in extreme conditions. The
water connection uniquely provides a
dual water/air seal ensuring a complete
leak free and maintenance free pressure
vessel.
On the exterior the almond colored two-
part polyurethane paint finish over an epoxy
undercoating provides hundreds of hours of UV
and salt spray protection.
PressureWave™ tanks are quality tested at several stages on the
production line to insure the structural integrity of every tank.
PressureWave™ tanks represent the best value for the investment
and are the best quality pressure vessels available today.
Features
• Single diaphragm design
• NSF Standard 61, CE/PED,
WRAS, ACS, ISO:9001, Gost
approved
• Patented stainless steel water
connection
• Virgin polypropylene liner
• Two part polyurethane, epoxy
primed paint finish
• Leak free, o-ring sealed air
valve cap
• Comprehensive testing
• No maintenance
PressureWave
™
Series
PressureWave
GLOBAL WATER SOLUTIONS LTD.
The
Goodnal STP ST041 Disinfection & Outfall (KSB Service Water Pumps Pu-1030-010/020/030 OM Instructions) Vendor Manual
Q-Pulse Id VM404
Active 29/10/2013
Page 34 of 42
