QA-MRK-FM-08-02 v1
Note:
Allow up to 12 hours for the first charge.
You can play your speaker whilst it is being charged, but
this will affect the charging time.
Battery protection mode
•
If you haven’t used the speaker for 90 days, the speaker will switch to battery protection mode
automatically. To cancel the battery protection mode, connect the DIGGIT XL to power as per
Step 1 under ‘Charging the battery’
•
To keep the rechargeable battery in good condition, please discharge and recharge speaker every
3 months, whether used during this time or not
Note:
For best sound quality when the battery is below 30%, it is best to charge the DIGGIT XL
Pairing the DIGGIT XL to your device
1.
Long press MFB (1) to turn the speaker on and it will automatically enter pairing mode and the
LED Indicator (8) will slowly flash white
2.
Turn your iOS, Android, or Windows device’s Bluetooth ON and search for new devices
3.
Select KS Diggit XL If asked for a passcode, enter ‘0000’, and the device will pair
4.
Once connected an audio tone will sound and the LED Indicator (8) will be solid white
Re-pairing or pairing new devices
1.
Turn Bluetooth connectivity off on any previously paired devices
OR
2.
Double tap the MFB (1) to re-enter pairing mode
3.
Follow the ‘Pairing the DIGGIT XL to your device’ instructions
Note:
If a previously paired device is not present within the Bluetooth connectivity range then the
speaker will re-enter pairing mode.
Playing music on your speaker
Bluetooth
When connected via Bluetooth, play music on your device and the sound will play through the
speaker. Some devices may require you to select the audio output.
Auxiliary
1.
Plug the Aux cable into the speaker’s Aux-in Port (6) and your device using the supplied
cable
2.
The LED Indicator (8) will be solid white
Once connected to the DIGGIT XL either wired or by Bluetooth, please follow the instructions on
next page:
Function
Bluetooth mode
Auxiliary mode
Short press 2
Short press 2
