English
29
PROBLEM
SOLUTION
The filter holder
(h)
over-
flows or the coffee drips
too slowly.
n
Excessive amount of coffee. We
recommend that you use one measuring
spoon or one tablespoon of coffee ground
per cup.
n
Coffee ground too fine (unsuitable for an
automatic coffee maker).
n
The jug
(f)
is not well positioned on the hot
plate
(e)
.
n
The coffeepot
(f)
was removed for more
than 20 seconds during brewing and was
not correctlyput back on the hot plate
(e)
.
n
Some coffee grounds have seeped in
between the paper filter and the filter
holder
(h)
.
n
The paper filter is not open or is incorrectly
positioned.
n
Rinse out the filter holder (h) before
putting in the paper filter so that its edges
stick to the damp sides of the filter.
The coffee has a bad
taste.
n
The coffee maker needs to be cleaned.
n
The coffee grounds are not suited to your
coffee maker.
n
The proportion of coffee to water is
inadequate. Adjust it to suit your taste.
n
The quality and freshness of the coffee are
not optimal.
n
Poor-quality water. Use filtered or bottled
water.
With machine equipped
with a thermal pot, the cof-
fee temperature is too low.
n
Warm the thermal pot by rinsing with hot
water just before brewing.
IFU_KR_COFFEE_MAKER_DAHLSTROM_MECA_Mise en page 1 23/11/10 09:03 Page29
