Krups OVOMAT SPECIAL F233 Series, Manual, Page: 13 / 46

15
English
END OF COOKING:
„
When the water has evaporated, a beep sounds to advise that cooking has ended.
„
Move the switch to the O position.
(9)
.
„ The appliance stops operating. The eggs are ready.
„
Remove the lid using oven gloves as the appliance is still hot and hot steam escapes
through the opening on the lid. (10) .
„
Grasp the egg holder by the handle (using oven gloves if necessary).
(11)
.
„ Remove the egg holder from the appliance and run under cold water to cool the
eggs. (12) .
BOILED EGGS
SOFT BOILED EGGS
HARD BOILED EGGS
„ Fill the lower part of the appliance with cold water depending on the cooking method
selected.
„
Use the water jug for the quantity of water required
(1 to 2)
.
„ Place the egg holder on the lower part of the appliance (place the egg holder in the
right way - 3 ).
„
Turn the water jug and position it so it is flat with the egg piercing needle uppermost.
„
Take each egg and place it on the Egg piercing needle so that the shell is pierced, to
prevent the egg from cracking during cooking. (4) .
„ Position the eggs evenly around the egg holder. (5) . Make sure to place the eggs in
such a way that the opening is at the top. (If you want to cook less than seven eggs,
place them along the edge of the holder).
„ Place the lid correctly on the egg holder. (6) .
„ Unwind the power cord and plug your appliance into the mains power supply.
„
Move the switch to the I position. (7) .
„
During cooking some hot steam will escape through the small opening on the top of
the lid, this is completely normal. (8) .
Do not place hands over this opening in the lid during cooking.
CLEANING AND MAINTENANCE:
„ Before any cleaning or maintenance, unplug and leave the appliance to cool.
„
The lid and egg holder are cleaned using water and washing up liquid.
„
Wipe the appliance exterior and the cord using a damp cloth.
„ Leave to dry.
„ Do this regularly, ideally after each use.