8
Push down the toasting lever to begin the toasting process
(Fig. 5)
.
– 4 slice model: If you are only toasting one or two slices of bread, push down the toasting
lever on the side where you put the bread. If you are toasting three or four slices of
bread, push down both toasting levers.
– The toasting lever only stays down when the appliance is plugged in and bread is being
toasted.
After pressing down the lever to start toasting, the cancel button will light up.
(Fig. 6)
.
Caution:
The metal parts of the toaster will become hot during toasting. Do not touch them.
Note:
You can stop the toasting process and pop up the bread at any time by pressing the
CANCEL button on the toaster.
To adjust the browning setting during toasting, turn the browning control.
When the toast is ready, it pops up and the toaster switches off.
Remove the toasted bread. To remove smaller items, move the toasting lever upwards a
little further.
– If bread gets stuck inside the toaster, remove the plug from the wall socket, let the
appliance cool down completely and carefully remove the bread from the toaster.
Caution:
Do not use a knife or another sharp metal tool to remove bread from the toaster
and do not touch the metal internal parts as well as heating elements of the toaster.
BAGEL FUNCTION
The toaster has a preprogrammed BAGEL function that toasts the BAGEL on the cut sides
and warms it on the outside.
Insert the BAGEL as shown
(Fig. 7 or Fig. 8.)
, with the cut sides facing inwards.
Select the desired browning setting and push down on the toasting lever (see section
‘Toasting bread’).
Press the BAGEL button
(Fig. 9)
.
The BAGEL button will light up.
CLEANING
Unplug the appliance and let it cool down
(Fig. 10)
.
To remove crumbs from the appliance, gently slide the crumb tray out from the appliance
and empty it
(Fig. 11)
.
Caution:
Do not hold the appliance upside down and do not shake it to remove the
crumbs.
Clean the body of the appliance with a damp cloth
(Fig. 12)
.
Danger: Never immerse the appliance in water.
Caution:
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as
petrol or acetone to clean the appliance.
Caution:
Any other servicing should be performed by an authorized service representative.
