Krups KB720, User Manual

Page: 5 / 10

4
The maximum power of your blender is reached with the food chopper
accessory
(G ).
Important: Ensure that the blender cover ( E) with measuring stopper (F) are
correctly fitted on the blender jar (D).
When blending solid ingredients, first cut them into pieces
1/2
” to 1” long.
Always pour liquid ingredients into the glass jar first before adding solid
ingredients.
To add ingredients once the blender has started, remove the measuring
stopper
(F) from the cover (E) and put them through the hole in the lid.
If ingredients become stuck to the sides of the jar during blending, stop the
appliance and disconnect it. Then remove the glass jar from the metal base.
Use a spatula to scrape the sides.
NEVER put hand or fingers into the glass jar or close to the blade.
- Never start the appliance on its highest speed.
- Always increase speed progressively.
- Remove the blender jar from the metal base only when it has
come to a standstill.
- For greater convenience or storage, the length of the supply cord can be
reduced by pushing it into the metal base (A) through the opening at the rear
(C) (diagram 1) .
- Before use, clean blender jar, cover, measuring stopper, in warm soapy
water. Rinse and dry them carefully.
Never immerse the body of the appliance and never put it under running
water
.
The capacity of the jar allows you a great deal of flexibility in your preparations.
Additionally, because the extra-thick glass is thermal-shock and scratch
resistant you can make a variety of ice-based preparations in complete safety.
1. Place the ring seal (d3) onto the base of the removable blade carrier (d2)
(diagram 2) .
2. Press the assembly (d2 + d3) down into the locking ring base (d1) . It will
click into place.
3. Place the glass jar (d4) onto the locking ring base (d1) , taking care to
ensure that the glass knobs on the bottom of the jar (there are two of them)
fit into the grooves near the top of the locking ring base
(diagram 3).
4. Hold the locking ring base (d1) firmly and give the glass jar a quarter turn to
lock it in place (diagram 3).
5. Place the assembled blender jar (D) onto the metal base (A). There are two
possible positions: the jar handle can be to the right or the left of the speed
selection panel
(B) . For your own safety, the blender will not start unless it is
correctly assembled and positioned on the metal base.
Important advice
Using your appliance
1
2
3