English
14
n
Choose between 6 different degrees of browning by setting the selector to the appropriate position:
Position 1 = lightly toasted
Position 6 = very well toasted
n
When first using, try out the toasting setting, as the result depends upon the type of bread and the
degree of moisture.
Generally speaking, a higher temperature is required for breads other than white. Turn the toasting
grade selector to a lower number if, for example, only one slice of bread is being toasted.
Caution:
Relatively dry slices of bread, or bread that has already been toasted once, will brown much
more quickly and may under certain circumstances catch fire. Therefore set the heat control to
a lower setting and do not leave the toaster unattended.
TOASTING
n
Fully depress the lowering lever, which will then lock into position (
4
).
This then causes the appliance to switch on.
TAKING OUT THE TOAST
n
After completion of the toasting operation, the toast will automatically be raised and the appliance will
switch itself off (
5
).
n
Take out the slices of toast.
To break off the toasting operation before it is completed, simply press the lowering lever upwards or
turn the toasting regulator on “stop” position (
6
).
Note:
Should a slice of bread become trapped in the toasting well, pull out the mains plug, let the
appliance cool down and then carefully free the toast without touching the heating elements.
Roll support
n
Raise the roll support by swivelling the two lifter grips upwards (
7
).
n
Place the rolls on the support and select the
position. Switch on the appliance (
8
).
n
Please take care for rolls rewarming function that the rolls and the lift have to be in the right position
(
9 - 10 - 11
).
To improve the results, turn the rolls over and repeat the toasting operation.
After use, lower the roll support by swivelling the two lifter grips downwards.
The roll support should not be used for longer than 10 minutes.
n
Before commencing the cleaning operation, pull out the mains plug.
Do not dip the appliance into water.
n
Never use an abrasive sponge to clean the toaster. Clean it with a moist cloth and then dry it with a
soft cloth to keep it bright.
n
Regularly remove crumbs and bits of toast.
n
Before pulling out the crumb drawer, allow the toaster to cool for at least ten minutes after
completion of the preceding toasting operation.
n
Pull out the crumb drawer and shake out the crumbs (
12
).
n
Clean with a moist cloth and then replace the crumb drawer.
ADDITIONAL ACCESSORIES
CLEANING
KR_TOASTCONTROL_NC00118936_NC0011893611/04/1316:15Page14
