11
If the above message
appears, remove, empty
and clean the drip tray.
The drip tray collects residual water and the coffee grounds collector collects used coffee grounds.
The coffee cleaning tray allows you to eliminate any deposits of coffee grounds above the percolation chamber.
Remove, empty and
clean the coffee
grounds collector.
The drip tray is equipped
with floats to tell you
when to empty it.
The warning message will remain displayed if the coffee grounds collector is not inserted correctly.
If the coffee grounds collector is inserted within less than 6 seconds, the machine will ask you to confirm that you
have correctly emptied it. You cannot make espresso or coffee while the warning message is displayed.
The coffee grounds collector has a capacity of 9 coffee cakes.
MAINTAINING YOUR MACHINE
As soon as you remove the coffee grounds collector, you will have to empty it completely to avoid any overflow.
Remove the coffee
cleaning tray.
Clean it under water
and
dry thoroughly
before re-inserting.
EMPTYING THE COFFEE GROUNDS COLLECTOR, THE COFFEE CLEANING TRAY AND THE DRIP TRAY
RINSING THE SYSTEM - SEE “PREPARING THE MACHINE FOR FIRST USE” SECTION (PAGE 8)
CLEANING PROGRAM – TOTAL DURATION: ABOUT 20 MINUTES
RINSING THE COFFEE CIRCUIT: SEE PAGE 8
You should perform the cleaning program after every 360 preparations of espresso or coffee.
The machine will let you know automatically on the display screen.
Caution! To benefit from the warranty conditions, it is essential to perform the machine cleaning
cycle when informed to do so. Be sure to follow the order of operations.
You can continue to use the machine, but you are advised to perform the program as soon as possible.
To perform the cleaning program, you will need a container with a minimum capacity of 21 oz/0.6 l and a Krups XS 3000
cleaning tablet.
The automatic cleaning program
is in three parts – a cleaning
cycle, then 2 rinsing cycles.
This program lasts about 20
minutes.
Press button to perform
cleaning at any time and then
choose SERVICES => OK =>
CLEANING from the menus
displayed.
Press the button
to start the automatic
cleaning program when
the “Cleaning needed”
message is displayed.
Just follow the
instructions
shown on the
screen.
If your machine is unplugged when cleaning or if there is a power outage, the cleaning program will re-start at
the step in progress when the incident occurred. You will not be able to postpone this operation. This is
essential to avoid any ingestion of the cleaning solution. In this case, you will need to use another cleaning
tablet. Be sure to complete the entire cleaning cycle to avoid any risk of irritation (seek medical advice if
cleaning solutions are accidently swallowed). The cleaning cycle is a discontinuous cycle. Do not put your
hands under the coffee outlets during the cycle.
Only use Krups XS 3000 cleaning tablets. We cannot be held responsible for any damage that may result
from the use of tablets from other brands.
You can obtain cleaning tablets from Krups Service Centers.
Make certain to protect your work surface during cleaning cycles, especially if it is made of marble,
stone or wood.
IFU KRUPS Nafta_Premium_USA_xxxxxxxx 31/05/10 14:33 Page11
