SHORT CORD INSTRUCTIONS
A.
A short power cord or a detachable power cord is provided to reduce the risks of
becoming entangled in or tripping over a longer cord accidentally.
B.
Longer detachable power cords or extension cords are available and may be used
if care is exercised in their use.
C.
If a long detachable power cord or an extension cord is used:
1) the marked electrical rating of the detachable power cord or extension cord
should be at least as great as the electrical rating of the appliance.
2) If the appliance is of the grounded type, the extension cord should be a
grounding type 3-wire cord.
3) the longer cord should be arranged so that it will not drape over the counter
where it can be pulled on by children or tripped over accidentally.
The appliance may have a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not attempt to modify
the plug in anyway.
n
Krups reserves the right to modify the characteristics or components at any time in the
interests of the consumer.
2. DESCRIPTION
3. BEFORE FIRST USE
n
Remove all packaging and accessories both inside and outside the kettle.
n
Adjust the length of the power cord by coiling the excess under the base. The powercord should extend
from the base through the slot in the back.
(fig. 1)
n
Rinse the inside of the kettle and the limescale filter (located in the spout) several times. Boil 2 or 3
kettles of water and discard to remove all manufacturing residues and dust.
n
Wipe the outside of the kettle and the base with a clean damp cloth. To avoid damage to the electronics,
avoid exposing the base of the kettle or the bottom of the kettle to excess water.
4. USING YOUR KETTLE
1- Place the kettle base on a stable, clean surface away from heat sources. Connect the plug into an
outlet.
Note:
The kettle
(a)
, kettle base
(b)
, and limescale filter
(e)
are specifically designed to be used together
and other accessories not designed for use with the kettle should not be used.
2- Open the lid by pressing the lid release button
(f)
on the handle
(g) (fig. 2)
. Fill the kettle with the
desired amount of water
(fig. 3)
.
English
7
a
Kettle
b
Base
c
Lid
d
Lid plastic cover
e
Limescale filter
f
Lid release button
g
Handle
h
Water lever indicator
i
On/Off switch
KR_KETTLE_BW730_NAFTA_NC00117831_Mise en page 1 14/02/13 17:07 Page7
