26
Owner’s manual
EN
During play, press the
VOL+/-
button to increase/decrease the volume level.
During play, press
S-BASS
button to turn on/off super bass enhancement. If S-BASS is
activated, [BASS] is displayed.
During play, press
LOUDNESS
button to turn on/off automatic loudness control.
During play, press
MUTE
button to mute or restore sound.
ADJUST VOLUME LEVEL AND SOUND EFFECT
Adjust volume level
Enhance bass
Select automatic loudness control
Mute sound
Please note, you cannot use different sound effects at the same time.
During play, press
P-EQ
button repeatedly to select:
FLAT / POP/ JAZZ / ROCK / CLASSIC
Select a preset sound effect
Press
DISPLAY
repeatedly to scroll through the following information (if available):
• Programme Type / RDS CLOCK / Radio Text / Frequency
Synchronize clock with RDS station
You can synchronize the clock time on the unit with an RDS station.
1. Tune to an RDS radio station that transmits time signals.
2. Press and hold
DISPLAY
button.
• [CT SYNC] is displayed and the unit reads RDS time automatically.
• If no time signal is received, [NO CT] is displayed.
Note: The accuracy of the transmitted time depends on the RDS station that transmits the
time signal.
SET ALARM TIMER
This unit can be used as an alarm clock. You can select USB or TUNER as alarm clock.
Note: Make sure that you have set the time correctly.
1. In standby mode, press and hold TIMER button, until [TIMER SET] scrolls on the
display.
2. Press / on the remote control or front panel to select a source.
3. Press
TIMER
button to confirm. The hour digits are displayed and begin to blink.
4. Press
/ button on the front panel or remote control to set hour, then press
TIMER
button again to confirm. The minutes digits are displayed and begin to blink.