
10
Owner’s manual
English
intRoDuction
Product description
1. Band
2. Bluetooth LED
3. Battery compartment
4. Battery compartment groove
5. Silicone strap
6. Battery compartment key
Battery
Kruger&Matz FitOne smartband is powered with CR2032 battery.
Before first use, insert new battery:
1.
Put the battery compartment key into the groove and pop up. (fig. 1)
2.
Insert new battery with correct polarity (fig.2).
3. Close the battery compartment. Press the two covers together until you
hear a click (fig. 3).
Blinking red LED signals low battery level. Insert a new battery as shown below.
⑤
⑥
④
③
①
②
③
①
②