Owner’s manual
37
EN
3. When target time is reached, the alert will sound for 10 sec. and the timer will start from 0.
RECORDING DATA
Notice: Please note, the GPS and pulse data are saved in the GPS device only during on
going timekeeping.
You can change to all modes during timekeeping, the recording of GPS and pulse data
continues until you stop the timekeeping in the stopwatch mode or the memory is full.
1. Press the SET button to start timekeeping. During ongoing timekeeping the GPS and
pulse data are recorded. Maximum memory: 350 hours.
2. To stop the timekeeping and also the recording of GPS and pulse data, press the SET
button again.
3. To continue the timekeeping and therefore also the recording of GPS and pulse data,
press the SET button again, to stop again press the SET button.
4. To reset the timekeeping and save the recording of the GPS and pulse data, press the
SET button for about 3 seconds during stopped timekeeping. Your run or ride is now
saved as one recording in the device.
5. If you start the timekeeping again with the SET button again, a second recording is
started, etc.
Deleting the memory:
If the timekeeping is at zero, press the SET button for about 5 seconds.
CLEAR ALL STORE DATA IN WATCH
In stopwatch memory screen, press and hold SET button for about 5 seconds to clear the
memory.
