Kruger ALTO-H User Manual Download Page 7

6

LIGHTING

The range hood requires two type JCD, 12V, 20W max, G-4 base, 
halogen bulbs.

WARNING: Always switch off the electrical supply before 
carrying out any operation or maintenance on the appliance.

1. 

Remove the halogen bulb cover with a flathead screw driver.

2. 

Remove the bulb by pulling it out of its socket horizontally. 

 

DO NOT ROTATE THE BULB.

3.  

Replace the bulb with an identical type JCD, 12V 20W G-4 

 

base halogen bulb. DO NOT touch replacement bulbs with 

 

bare hands.

CAUTION: The surface, the cover of the bulbs, and the bulbs 
themselves may be hot. Please use extra care when removing
them.

Electrical Connection

1. 

Electrical wiring must be done by a qualified professional in 

 

accordance with all applicable codes and standards. Turn off 

 

electrical power at service panel before wiring.

2. 

Do not extend the cord with an extension cord or splitter that 

 

is not supplied with the hood.

3. 

Grounding of this product is compulsory. Do 

NOT 

remove 

 

ground prong of the plug.

3. 

The maximum distance between the power outlet and the unit 

 

is 50”. Do not stretch or over-tighten the power cord.

50”

Summary of Contents for ALTO-H












Reviews: