Krüger & Matz KMP-AD1, Owner'S Manual

Page: 10 / 28

EN
Owner’s manual
10
PRODUCT DESCRIPTION
1. micro USB charging port
2. Earphone charging indicator
3. Charging case indicator
4. Button (manually start
charging)
5. LED indicator
6. MFB button
1 3 2
4
5 6 6 5
PAIRING
1. Remove the earphones from the charging case. The
earphones should turn on automatically. The earphones
should automatically pair with each other. LED should flash
red and blue.
• If the battery in the charging case is empty or if the earphones
will not turn on automatically, it is required to turn on the
earphones manually by pressing the MFB for 3 seconds on both
earphones.
2. After the earphones pair with each other, they will enter
Bluetooth pairing mode (blue LED on the right (master)
earphone flashes every 2 seconds).
3. Enable the Bluetooth function on the external device and
search for new Bluetooth devices.
4. Select and connect with this device (KMP-AD1). Voice
prompt indicates successful pairing. LED on right earphone
goes off.
Notes:
• Every time the earphones are switched on, they will connect
to last connected device automatically. Please note, your
device must be on with Bluetooth function turned on.
• If the earphones are not connected to any device, they will
automatically power off after about 3 minutes.