Owner’s manual
Owner’s manual
EN
EN
22
23
Program radio stations manually
1. Press FM button on the remote or use mode knob on the main unit to chose
FM radio.
2.Press and hold forward / back button on the front panel (or on the remote
control), the radio tunes to a first station automatically.
3.Repeat step 2 to tune to more stations. To tune to a station manually, press
the next / previous track button repeatedly until you find desired frequency.
FM / DAB RADIO
Tune FM / DAB stations
You can program a maximum of 20 preset radio stations. Press and hold the
PROG button to activate automatic programming.
• AUTO is displayed briefly.
• All available stations are programmed in the order of waveband reception
strength.
You can program a maximum of 30 preset radio stations. Press and hold the
SCAN button to activate automatic programming.
• AUTO is displayed briefly.
• All available stations are programmed in the order of waveband reception
strength.
Program FM radio stations automatically
Program DAB radio stations automatically
PLAY FROM AN EXTERNAL DEVICE
1. To play tracks from an external device, connect the devices with an audio
cable (cable not included), corresponding to the AUX IN jacks / AUDIO IN jack.
2.Press corresponding AUDIO IN/AUX IN button to select the audio input.
3.Start playing on the external device.
1. Tune to a radio station.
2.Press the PROG button to activate programming. The PROG begins to blink,
press it again to confirm. The preset number and the frequency of the
preset station are displayed.
3.Repeat the previous steps to program other stations.
Note: To overwrite a programmed station, store another station in its place.
Setting the clock
Adjusting the Display Brightness
1. In standby mode, press and hold CLOCK button to activate the clock setting
mode.
2.Use the track change buttons to select the desired value.
3.Press CLOCK button on the remote to go to next option.
In standby mode, press the DIM button to select brightness level.
PLAY FROM BLUETOOTH DEVICE
To connect your Bluetooth device to the unit, you need to pair the device to the
unit. Pairing needs only to be done once.
1. To connect devices, turn on the Bluetooth mode on this unit using the
Bluetooth button on the remote control or the mode knob on the head unit.
2.Turn on the Bluetooth function on your device.
3.Search for other Bluetooth device with your device.
4..Select “KM1961” in the pairing list.
5.Enter default password “0000” if necessary.
6.Press and hold pairing cleared button (PAIRING) to clear pairings.
The device also has an NFC communication module, thanks to which you can
also pair an external device with the Hi-Fi system without the need to search
for it in available Bluetooth devices. To do this, just turn on the NFC on the
external device and put it on the plate in the upper part of the main unit, and
then on the screen of the external device you must accept the pairing.
Caution:
• The operational range between this unit and a Bluetooth device is
approximately 8 m.
• Compatibility with all Bluetooth devices is not guaranteed.
• Any obstacle between this unit and a Bluetooth device can reduce the
operational range.
• Keep this unit away from any other electronic device that may cause
interference.
• If the distance between the devices exceeds the communication range, the
devices will be disconnected. To reconnect, place external device in
operational range.
