Krüger & Matz KM1584CD, Owner'S Manual

Page: 32 / 112

32
Owner’s manual
EN
SOUND QUALITy
Adjusting the Volume
To increase or decrease the volume, rotate the VOLUME control knob on the Amplifier or press the
VOL +/- buttons on the remote control.
Adjusting the Bass
Rotate the BASS knob on the Amplifier to adjust the intensity of the bass output sound.
Adjusting the Treble
Rotate the TREBLE knob on the Amplifier to adjust the intensity of the treble output sound.
Presetting equalizer
You can adjust the sound reproduced simply by choosing from 5 preset equalizers. Press the EQ
button repeatedly to scroll through the following options:
FLAT > POP > jAzz > ROCK > CLASSIC (looped)
Changing the Front Panel Darkness
This unit has three brightness levels for you to adjust the clock display. Press the DIM button on the
front panel or the remote control repeatedly to choose the desired brightness.
FM RADIO
You can listen to FM stations. Stations can be tuned in manually, automatically or from preset
memory storage.
Caution:
Before listening to the radio, please check that the FM Antenna is correctly connected and adjusted
for length and direction.
Tuning in to a Station
1. Rotate the Source button on the unit or press the FM button on the remote control. The word
“TUNER” will be displayed on the front panel.
2. Select a station using one of the following methods.
• Auto Tuning
Press and hold the
/
button on the remote control or on the unit for one second or more, the
frequency changes down or up automatically until a station is found.
• Manual Tuning
Repeatedly press the
/
button on the remote control or on the unit to change the
frequency until you find the station you want.
Note:
• The clock must be set in standby mode and if the set-up time for each step is longer than 90
seconds, set-up will be cancelled.
• If a power failure occurs or the unit is disconnected from the mains, the clock setting will be lost.
Setting the Clock Automatically
When the RDS station display the time, press and hold the “display” button on the remote control,
the clock will automatically sync time of RDS.