13
Owner’s manual
EN
charging
Connect the headphones to AC charger or a computer USB port. Red
Led keeps lighting during charging. Once the charging is completed,
the Led is off.
Note:
• use only original accessories to charge the headphones.
• charge the headphones at least once every 3 months to keep its
battery in good condition.
• the headphone’s battery must be charged in order to use them
in Bluetooth mode. However, when using in AUX mode, the
headphones will work even if the battery is empty.
Specification
• Speaker size: 40 mm
• Frequency response: 20 Hz - 20 kHz
• Impedance: 32 Ohm
• Sensitivity: 120 dB±3 dB (at 1 kHz)
• Supported formats: SBC, Mp3, AAC
• aptX® audio technology
• Bluetooth: 4.0
• Bluetooth range: up to 10 m
• Talk / playback time (BT mode): up to 10 h
• Standby time: up to 300 h
• Built in microphone
• Battery capacity: 300 mAh
• power supply: 5 v, 1 A