8
Owner’s manual
EN
PAIRING
1. Press and hold MFB for about 2 seconds. The headphones will turn on and
automatically enter Bluetooth pairing mode. The indicator will flash red and blue
alternately.
2. Activate your phone (or device) Bluetooth function and search for external devices.
You’ll see a list of available devices; find and connect with the headphones (KM
Soul 2).
3. Enter “0000” PIN if necessary.
4. After successful pairing, the headphones will issue a voice prompt. When the
headphones are paired with an external device, the blue indicator blinks.
Notes:
•
If pairing is not completed within 5 minutes, the headphones quit pairing mode. If
pairing is not completed within 10 minutes, the headphones will turn off. In that
case, repeat paring process to pair the headphones with external device.
•
Every time the headphones are switched on, they will connect to last connected device
automatically. Please note, your device must be on with Bluetooth function turned on.
OPERATION
Power on:
Press and hold the MFB for about 4 seconds; blue LED is on.
Power off:
Press and hold the MFB for about 4 seconds; blue LED is off.
Answering/Ending/Rejecting/Redialing:
Press MFB to answer/end an incoming call. Press and hold MFB to reject an incoming
call. Press MFB twice to redial. Note: Redialing is available only for the first device if
two mobile phones are connected.
Play music:
•
tap Play/Pause area to play/pause music
•
slide up in the Volume up area to increase volume; slide down in the Volume
down area to decrease volume.
•
slide backward in the Previous track area to go to the previous song; slide forward
in the Next track area to go to the next song.
AUX INPUT
1. Use 3,5 mm AUX cable and connect one end of the cable into the headphones’
3,5 mm input.
2. The headphones will automatically enter AUX mode.
3. Connect the other end into the 3,5 mm input of the device you wish to play music from.
4. Start playing music from your device.
